21
After finishing the settings, click "Save" on the right.
•
Default IP address of NET1: 192.168.0.100
•
Default IP address of NET2: 192.168.13.127
8.4
DI Settings
F
Fu
un
nc
cttiio
on
n D
De
essc
crriip
pttiio
on
n
The UMCG is equipped with DI ports. On the "DI settings" interface, you can set the
status of each DI port.
S
Se
ettttiin
ng
g M
Me
etth
ho
od
d
step 1
Click "Settings" -＞ "DI settings" to enter the corresponding interface.
step 2
After finishing the settings, click "Save" to save the operation.
table 8-1
Parameter description
IItte
em
m
D
De
essc
crriip
pttiio
on
n
Measure point type
Normally open
Normally close
Function
Inverter boot
Inverter shutdown
Dry node signal
Output DO
DI and DO are linked. When DI collects a valid signal,
DO acts; and when DI signal recovers, DO signal
also recovers.
Input delay (ms)
Reserved
Output delay (ms)
If the DI collects a valid signal or recovers, the DO
will act with a delay of this time.
-- -- E
En
nd
d
User Manual
Summary of Contents for UMCG
Page 2: ......
