User Manual
76
(2) The value of battery SOH will be displayed as “--” for GCL batteries that
do not have this parameter. The SOC value for lead-acid batteries is for
reference only.
(3) The DRM0 state will prohibit the “ON”.
(4) The “Restart” option will appear only if an unrecoverable fault occurs.
The demand response mode (DRM), reactive power settings about
Qt, Q(p), Q(u), and power derating settings are valid only for
Australia.
10.3
Starting and Stopping the Inverter
Notice:
The Restart item will appear only if an unrecoverable
fault occurs.
ON / OFF
OFF
Restart
ON
Confirm your choice by pressing
ENT
.
Confirm ‘ON’?
Confirm ‘OFF’?
or
or
Confirm ‘Restart’?
When the DRM state is DRM0, the “ON” option will
be prohibited.
The DRM0 state will
prohibit the 'ON'!
10.4
Advanced Settings
10.4.1 Inputting Password
The parameter settings are protected with a password. If you want to set the
inverter’s parameters, you have to input the correct password.
Press
to add the value and
Press
ENT
to move the cursor to input the
password
111
.
Press
ENT
to confirm the password and enter the submenu.
