Sungrow SG30CX, User Manual

Page: 72 / 113

62
Network Service Provider
Grid Type
CitiPower & Powercor
• ≤ 5 kVA for single-phase & 30 kVA for
three-phase
• > 30 kVA three-phase
United Energy
• UE-ST-2008.1: ≤ 10 kW for single-
phase & 30 kW for three-phase
• UE-ST-2008.2: > 30 kVA three-phase
PowerWater Embedded Generation Notice Photovoltaic
Systems:2020
SA Power Networks
• TS129-2019: < 10 kW for single-phase
& 30 kW for three-phase
• TS130-2017: > 30 kW & ≤ 200 kW
• TS131-2018: > 200 kW
Horizon Power
• HPC-9DJ-13-0001-2019: ≤ 10 kVA for
single-phase & 30 kVA for three-phase
• HPC-9DJ-13-0002-2019: > 30 kVA &
≤1 MVA
westernpower EDM ＃ 33612889-2019
AusNet Services Basic Micro Embedded Generation:2020
For compliance with AS/NZS 4777.2:2020, please select from Australia A/B/C. Please con-
tact your electricity grid operator for which region to use.
step 6 After finishing the settings, tap TUNR ON DEVICE at the upper right corner and the device
will be initialized. The App will send start instructions and the device will start and operate.
step 7 After initialization settings, the App will return automatically to the home page.
- - End
7.5 Home
After login, the home page is as follows:
7 iSolarCloud App User Manual