Sungrow SG250HX-IN-20, User Manual

Page: 54 / 109

44
Observe the specifications of the cable manufacturer with regard to the permitted
bending radius. Make sure that the bending radius of the cable is at least 20 mm.
Do not bottom out the capnut.
5.8 Wiring of Tracking System Power Cable (Optional)
Step 1 Lead the AC cable into the wiring compartment according to Step 1 to Step 4 described
in
"
5.6.4 Connection Procedure
"
.
Step 2 Loosen the swivel nut of the communication terminal and select an appropriate seal
according to cable outer diameter. Lead the cable through the swivel nut and seal
successively.
O Ou utte err d diia am me ette err D D((m mm m))
S Se ea all
4.5~6
c
6~12 a+b
13~18 b
Step 3 Remove the protection cover and store the released screws properly.
5 Electrical Connection User Manual