18
4 Identify and Store the MV Station
4.1
Identifying the MV Station
Identify the MV Station from its nameplate. The nameplate contains the following
information: MV Station model, major technical parameters, marks of certification institutes,
origins, and serial number which are available and recognized by Sungrow.
Very important technical parameters and MV Station related parameters are
contained in the nameplate.
Protect the nameplate at all times!
4.2
Checking for Transport Damages
The MV Station has been strictly inspected and tested before delivery. Despite robust
packaging, the container or inside devices may be damaged during transport. Therefore,
once you receive the MV Station, a detailed inspection is necessary.
If any damage is detected, contact the shipping company or Sungrow immediately. A
relevant photo is preferred. We will provide you with the fast and best service.
Examine the contents of the shipment to check if there is anything missing according to
the scope of delivery.
Check to make sure the MV Station and inner devices are the models placed in your
order;
Check thoroughly the MV Station and inner devices for any possible damages during
transport.
Install and commission the MV Station only when it is technically faultless! Make
sure before installing the MV Station that
MV Station is intact without any damage;
all devices inside the MV Station are intact without any damages.
4.3
Storage of the MV Station
If it is not to be installed immediately after delivery, store the MV Station appropriately:
Store the MV Station indoors, for example large warehouse or workshop to prevent
possible condensation or damp;
If the MV Station has to be stored outdoors, elevate the MV Station base according to
the field geological and ambient conditions. And when the ambient temperature is too
low, heat the MV Station internal devices.
Temperature: -40°C~+70°C;
