Sungrow SG1K5TL, User Manual, Page: 53 / 69

SG1K5TL
User Manual
48
8.1
Button Function
Inverter offers two buttons for user to look up running information and configure
parameters. And the two buttons are reusing ones. User should know the button
operation and function before any operation onto inverter.
Table 8-1 Description of Button Function
Name Operation Description
Press less than two
seconds
Move cursor upwards and downwards in the screen
or increase and decrease the setting value. In the
following text, it is called “short press “ ”.
“ ”
Press more than two
seconds
Return to parent screen or cancel the command.
In the following text, it is called “long press “ ”.
Press less than two
seconds
Move cursor left or right in the screen. In the following
text, it is called “short press “ ”.
“ ”
Press more than two
seconds
Enter into sub-screen or confirm the command. In the
following text, it is called “long press “ ”.
When the two buttons are pressed over three seconds simultaneously, inverter will
stop running and enter into the “stop” state.
The background illumination of LCD screen will go out to save power if there is not
button operation in one minute. You can activate it by pressing any button.