Sungrow SG125HX, User Manual

Page: 30 / 103

20
step 3 Secure the mounting-bracket with bolts.
N No o..
C Co om mp po on ne en nttss D De essc crriip pttiio on n
A
Mounting-bracket
–
B Full threaded bolt M10*45
C Metal bracket
–
D Flat washer
–
E
Spring washer
–
F Hex nuts
–
-- -- E En nd d
4.5.2 Wall-Mounted Installation
step 1 Assemble the mounting-bracket by using the connecting bar.
step 2 Level the assembled mounting-bracket by using the level, and mark the positions for
drilling holes on the installation site.
step 3 Insert the expansion bolts into the holes and secure them with a rubber hammer. Fasten
the nut with a wrench to expand the bolt. Remove the nut, spring washer, and flat
washer, and store them properly.
4 Mechanical Mounting User Manual