Sungrow SG110CX-P2, User Manual

Page: 68 / 126

58
step 6 Remove the waterproof lid from the COM1 terminal and install WiNet-S.
step 7 Slightly shake it by hand to determine whether it is installed firmly.
- - End
5.10.2 WLAN Communication
step 1 Remove the waterproof lid from the COM1 terminal.
step 2 Install the module. Slightly shake it by hand to determine whether it is installed firmly, as
shown below.
step 3 Refer to the guide delivered with the module for the set-up.
- - End
5.11 Communication Junction Box
Remove the Communication Junction Box
Squeeze both sides of the communication junction box with force, and pluck it out.
5 Electrical Connection User Manual