86
MPLC Parameters
Tap
Settings→Communication Parameters→MPLC Parameters
to enter the correspond-
ing interface, as shown in the following figure.
figure 7-22
MPLC Parameters
table 7-10 MPLC Parameters
Parameter
Range
Band Num
Band1, Band2
Array ID
1–255
Winding ID
1–10
7.10.5 Firmware Update
To avoid download failure due to poor on-site network signal, it is recommended to download
the firmware package to the mobile device in advance.
step 1 Enable the "Mobile data" of the mobile device.
step 2 Open the App, enter the account and password on the login screen. Tap
Login
to enter the
home screen.
step 3 Tap
More→Firmware Download
to enter corresponding screen on which you can view the
device list.
step 4 Select the device model before downloading the firmware. Tap the device name in the de-
vice list to enter the firmware upgrade package detail interface, and tap
behind the firm-
ware upgrade package to download it.
step 5 Return to the
Firmware Download
screen, tap
in the upper right corner of the screen to
view the downloaded firmware upgrade package.
step 6 Login the App via local access mode. Refer to
.
User Manual
Summary of Contents for SG10RT
Page 2: ......
Page 6: ......
Page 10: ......