59
6.5
Initializing the Device
The inverter is successfully connected to the router.
If there is no latest equipment upgrade package, skip steps 1 and 2.
The actual initializing procedure may differ due to different countries. Please follow the ac-
tual App guidance.
step 1 If a latest equipment upgrade package is available, the following prompt window pops up.
Tap
UPDATE NOW
to download the latest update package.
figure 6-8
Upgrade Reminder
step 2 After download, it would take around 15 minutes to update. After successful upgrade, the
screen will show the version numbers before and after the upgrade as well as the upgrade
time. Tap
NEXT
.
figure 6-9
Upgrading Inverter
If the communication equipment is upgraded, after successful upgrade, check and
confirm that the phone is connected to the inverter WLAN.
step 3 Tap
Country/Region
and select the country where the inverter is installed at. The supported
countries and corresponding settings are as follows.
Country/Region
Country Code Setting
Australia ("AU")
Australia
New Zealand ("NZ")
New Zealand
Poland ("PL")
Poland
User Manual
Summary of Contents for SG10RT
Page 2: ......
Page 6: ......
Page 10: ......
