34
step 5 Connect the PE wire to ground and the phase lines and the "N" line to AC circuit breaker.
Then connect the AC circuit breaker to electric board.
step 6 Make sure all wires are firmly installed via the right torque tool or dragging the cables slightly.
- - End
5.6
DC Cable Connection
Danger of electric shock!
The PV array will generate lethal high voltage once exposed to sunlight.
Make sure the PV array is well insulated to ground before connecting it to the
inverter.
During the installation and operation of the inverter, please ensure that the positive
or negative polarities of PV strings do not short-circuit to the ground. Otherwise,
an AC or DC short-circuit may occur, resulting in equipment damage. The damage
caused by this is not covered by the warranty.
User Manual
Summary of Contents for SG10RT
Page 2: ......
Page 6: ......
Page 10: ......
