48
step 6 Plug the wires or terminals into the corresponding terminals as shown in the following figure.
figure 5-7
A1, B1 connection
step 7 Ensure that the wires are securely in place by slightly pulling them and insert the terminal
plug into the housing until there is an audible click.
step 8
For RS485 daisy chain:
Crimp two wires A to a two-wire core end terminal and two wires B
to another terminal. Plug the terminals to A1 and B1 respectively.
figure 5-8
RS485 daisy chain connection
step 9 Fasten the swivel nut.
User Manual
Summary of Contents for SG10RT
Page 2: ......
Page 6: ......
Page 10: ......