4
2
Safety Instructions
This chapter mainly introduces safety instructions that need to be respected during the
operation of Logger4000.
The Logger4000 has been designed and tested strictly according to international safety
regulations. As electrical and electronic equipment, the Logger4000 must be installed,
commissioned, operated, and maintained in strict accordance with related safety
instructions. Incorrect operation or misuse of the device may cause:
•
damage to personnel safety of the operators or the third party
•
damage to the Logger4000 or other properties belong to the operators or the third
party
Therefore, the following safety instructions must be read and always kept in mind prior
to any work. All detailed work-related safety warnings and notes will be specified at the
critical points in corresponding chapter.
All operations and electrical work must only be performed by qualified
personnel.
B
Be
effo
orre
e IIn
nsstta
alllla
attiio
on
n
After receiving the device, please check if there is damage caused during
transport. Contact SUNGROW or the forwarding company once any problem is
found.
The related operators must be familiar with the safety instructions in this manual
and other safety regulations about the installation, operation and maintenance
of the Logger4000.
Move, transport, install, operate, and maintain the Logger4000 correctly and
appropriately.
D
Du
urriin
ng
g IIn
nsstta
alllla
attiio
on
n
The Logger4000 can only be used as described in this manual. Altering the
product without authorization or using spare parts not sold or recommended by
SUNGROW may lead to fire, electric shock or other damages.
