Sungrow Logger1000A User Manual Download

Page: 55 / 92

9.10.2.2 Log export

Step 1

Click "System" -> "System Maintenance" to enter the corresponding interface.

Step 2

Click the button "Log Export" to enter the corresponding interface.

Step 3

Select the type of logs to be exported, and click "Confirm".

-- -- E

9.10.2.3 Rebooting

Step 1

Click "System" -> "System Maintenance" to enter the corresponding interface.

Step 2

Click "Rebooting" to enter the corresponding interface.

Step 3

A warning window will pop up, and click "Confirm" to continue the rebooting operation.

-- -- E

9.10.2.4 Reset all setting

Step 1

Click "System" -> "System Maintenance" to enter the corresponding interface.

Step 2

Click "Reset All Settings" to enter the corresponding interface.

Step 3

A warning window will pop up, and click "Confirm" to continue the reset all settings
operation.

-- -- E

Restoring the factory settings refers to restoring all modified settings to the

factory state and will not clear the data.

9.10.3 Remote Maintenance

Step 1

Click "System" -> "Remote Maintenance" to enter the corresponding interface.

User Manual

9 Web Interface

Summary of Contents for Logger1000A





























































































Search results

Summary of Contents for Logger1000A

Reviews:

Related manuals for Logger1000A

Brands by name

Popular brands

Sungrow Logger1000A, User Manual

Search results

Summary of Contents for Logger1000A

Reviews:

Related manuals for Logger1000A

Brands by name

Popular brands