17
figure 2-4
Front view and top view (unit: mm)
2.6.2 Pole Installation
step 1 Connect the AC cable.
1
Remove the cover plate on the back of the pole using a cross screwdriver.
2
Lead the AC cable through the bottom into the pole.
3
Grab the AC cable when it reaches the cover plate and take out the end of the cable
from the AC cable outlet.
4
Pull the cable out to an appropriate length and close the cover plate.
step 2 Mount the charger.
1
Place the pole on a solid and flat surface, and mark the positions of the drill holes.
2
Drill holes at the marked positions using a hammer drill. (Diameter: 12 mm; depth: 85
mm)
User Manual
Summary of Contents for AC011E-01
Page 2: ......
Page 6: ......
Page 27: ...19 End figure 2 5 Pole mounted charger User Manual 2 Installation...