SunFounder TS-10 Manual Download Page 52

Page: 52 / 213

SunFounder TS-10 10.1-inch Touch Screen

5.3.3 Print 3D Model

After the .stl file has been sliced, the 3D model file can be sent to the 3D printer through OctoPrint to be printed.

Open the Raspberry Pi’s browser, and enter

http://192.168.18.179/?#temp

to log in to OctoPrint.

Note:

Before logging in to the OctoPrint’s web UI, OctoPrint will first need to have been successfully installed on

the Raspberry Pi.

The IP address 192.168.18.179 will need to be replaced with the local IP address of the Raspberry Pi. Hover the cursor
over the WiFi icon on the Raspberry Pi desktop, and the local IP address will be displayed.

Chapter 5. PROJECTS AND ACTIVITIES

Summary of Contents for TS-10






















































































































































































































Search results

Summary of Contents for TS-10

Reviews:

Related manuals for TS-10

Brands by name

Popular brands

SunFounder TS-10, Manual

Search results

Summary of Contents for TS-10

Reviews:

Related manuals for TS-10

Brands by name

Popular brands