SunFounder TS-10 Manual Download Page 158

Page: 158 / 213

SunFounder TS-10 10.1-inch Touch Screen

Now, click on the green flag above the stage area to start the game and explore the magical binary!

Challenge

I believe that you will be smart enough to program and implement this game soon. Next, we will add some challenges
to enrich our game content.

• Add a Zero sprite to convert random integers between 1-32.

• When you click on the Zero sprite, a “Pop” sound effect will be emitted.

• 1 point will be deducted for incorrect answers!

5.7.8 Flappy Parrot

Description

Today we made the parrot Devin avoid the trees for food.

Click on the green flag to start.

Or click

Flappy Parrot

, and then learn online tutorial on the Scratch official website.

Required Components

• A Screen

• Scratch 3 (either online or offline)

You Will Learn

• Add more costumes to sprites and let them change their appearance

• Logical Operation

• Determine if the sprites are touching each other

154

Chapter 5. PROJECTS AND ACTIVITIES

Summary of Contents for TS-10






















































































































































































































Search results

Summary of Contents for TS-10

Reviews:

Related manuals for TS-10

Brands by name

Popular brands

SunFounder TS-10, Manual

Search results

Summary of Contents for TS-10

Reviews:

Related manuals for TS-10

Brands by name

Popular brands