SunFounder RasPad 3, Manual

Page: 62 / 239

SunFounder RasPad 3
Step 4
: Insert the micro-SD card into the RasPad, and press the power button to boot up the system.
Warning:
The SD card slot is a snap-in style attached to the back cover. Before removing or replacing the back
cover, remove the micro-SD card to avoid damaging the micro-SD card and the RasPadâ ˘ A ´ Zs internal button board.
7.2.4 RetroPie Configuration
After the RasPad boots up, the Controller and WiFi settings should be configured, as well as transferring game ROMs.
A keyboard and a gamepad are needed when doing these steps.
The detailed steps are shown in the video:
Note:
1. You can also go to RetroPie official website to detailed tutorial: RetroPie Docs.
2. RetroPie allows you to turn your Raspberry Pi or PC into a retro-gaming machine. But because of the na-
ture/complexity of copyright/intellectual property law (country-specific), RetroPie doesnâ ˘ A ´ Zt provide ROMs
for games. If you want to get them, you can download from the forum or Google to find the sources, then place
one ROM under the directory of
RetroPie emluator
.
Below is an example of the RasPad using the ROM of Super Mario 3.
58 Chapter 7. RASPAD PROJECTS AND ACTIVITIES