9
Modulation Signal: 6-CH transmitter standard PPM PWM Working Voltage: 9 VDC (6*1.5V)
Control Distance: > 500m (in actual measurement)
Receiver Specification:
Working Frequency: 2.400-2.4835GHz ISM BAND Working Voltage: +4-8VDC
Working Current: 20mA typical RX Sensitivity: -100dBm typical
Demodulation Signal: 2–6 CH standard PPM PWM With adjustable sensitivity & signal pairing indicator
Receiving Distance: > 500m (in actual measurement)
Operations:
1.
About pairing, here're the steps: Connect the receiver to the flight controller,
press and hold the pairing button and release it, and you'll see the LED on the
receiver blink. Turn on the transmitter, the indicators on the receiver and
transmitter will flash synchronously, indicating they are matching, then the
indicator may stop blinking and turn into steady, which means the two are
successfully matched. Then they can communicate normally.
2.
There is no need to match the receiver later after doing successfully here.
SunFounder
