http://www.sunflower-solar.com/
Version 11.04
Subjec
t to c
hang
e 2011 SUNF
LOWER SOLAR
11
5.3. Assemble Vacuum Tubes
(Please wear gloves to protect yourself in case of a broken tube)
5.3.1 Loosen the screw of the spiral tight clip so that the spiral tight clip
can be opened
5.3.2 Insert the glass tubes into the
water tank
1)
Carefully unpack the vacuum tube carton. Please take care during the process of inserting the glass
tubes, because they can easily be broken and broken tubes can hurt you. Fit a black decoration ring
on a tube from the open end with the round side facing down. Slide this 200mm (about 8 inches)
down below the top of tube.
2)
Daub the thermal silicon grease on the heat exchange end of SFVB solar tube (the copper part), then
rotating the pipe, slowly insert the heat exchange end of SFVB solar tube into the water tank
3)
Fix the bottom end of SFVB solar tube (the Black silicon tube cup is on the end) on the bottom rail
by resting it against the U type notch and securing it with the spiral tight clip;
