background image

8013ADELUXE/8013ABKDELUXE/8013ABLDELUXE

 

 

rev. 06/04/18

© Copyright 2018, Sunex Tools

®

Read and follow all instructions in User's Manual. • Maximum load 

capacity 350 lbs. • Units can tip or strike you causing personal injury. 

• Do not open more than one loaded drawer at a time. • Lock lid and 

drawers before moving. • Do not stand on or step in drawers. • Apply 

brake on locking casters anytime cart is in place. • Move cart slowly 

when loaded, avoid cracks, holes and other floor irregularities. • Do 

not pull; push to move. • Improper moving or loading can cause injury.  

• Failure to heed these warnings may result in personal injury and/or 

property damage.

WARNING

MODEL 8013ADELUXE / 8013ABKDELUXE / 

8013ABLDELUXE

SERVICE CART WITH LOCKING TOP & DRAWERS

INCLUDES PRY BAR HOLDER AND SIDE WORK BENCH

WARNING: 

This product can expose you to chemicals including 

nickel, which is known to the State of California to cause cancer and 

birth defects or other reproductive harm. For more information go to 

www.P65Warnings.ca.gov.

Chrome Legs (2)
(With Inserts Installed)

Keys 
(Attached  
to Legs)

Locking Casters (2)

Non-Locking Casters (2)

Locking Drawer Assembly

Bottom Tray

Pry Bar Holder

Side Work Bench

Rubber Mallet

Table or Workbench

6mm Wrench

Phillips Head

Screwdriver

2 People

Long Drawer Handle (1)

Drawer Handle  
Screws (14)

Short Drawer Handles (4)

TOOLS NEEDED

THIS OPERATING MANUAL CONTAINS IMPORTANT SAFETY INFORMATION. 
READ CAREFULLY AND UNDERSTAND ALL INFORMATION BEFORE OPERATING 
THIS CART. SAVE THIS MANUAL FOR FUTURE USE.

Examine box contents, then proceed with following instructions.

M6x42 Bolts,  
Nuts, & Washers 
(8 Pcs. Each)

OPERATING MANUAL

PARTS LIST

Summary of Contents for 8013ABKDELUXE











Reviews: