CCELL USER GUIDE
03
Charging
01. Screw in the 510 thread end of the
Power Supply into the 510 thread USB
charging adapter.
02. Plug USB into active port or wall adapter.
03. Halo lights up, indicating the device is
charging. Halo remains lit during charging.
04. Halo flashes 20 times and turns off when
fully charged.
05. Charging light stays red, even when fully
charged. Once device is fully charged the
light on the end of the battery will pulse
10 times and then turn off, indicating full
charge. If device is plugged into an active
USB port and the halo is not lit, the device is
fully charged.
THIS DEVICE IS EQUIPPED WITH
OVERCHARGE PROTECTION,
ALLOWING IT TO STAY PLUGGED
IN UNTIL USED.
