Page 74
880 SERIES
22.8
Generic MP3 Player Operation
1.
Connecting Your MP3 Player
A. The Audio unit is equipped with an
auxiliary audio input jack, that allows
the user to listen to external source,
such as an MP3 Player.
2.
Setting Up The MP3 Player for Use
A. Select preferred song/album/playlist
prior to plugging in MP3 player and
start playback.
B. Press “Mode Button” on stereo
receiver until the LCD display reads
“
AUx
”.
Note:
All external MP3 player playback operations are performed solely
by the MP3 Player with the exception of volume control and “Mode
Button” selector, which can be controlled via wireless remote or on the
stereo receiver.
CAUTiON
:
riSk OF eLeCTriCAL SHOCk Or eQUiPMeNT
dAMAGe
!
Never install, handle or remove MP3 player while hands are wet or
while sitting partially or fully immersed.
22.9
intelli-Sound Stereo Troubleshooting
1.
Unit will not turn-on
Make sure spa power is turned on, then
check both harness fuses on side of unit
making sure they are the proper ratings:
Yellow memory B+ line (10A fuse).
•
When faced with a malfunction during
•
operation, push BND button (8) and EJ
button (13) at the same time to reset
software.
Using a thin rod to press the reset button
•
located besides the USB docking station to do a hardware reset (Fig. A).
Note:
It will be necessary to re-enter the radio preset memories and
other personal settings after performing a reset. After resetting player,
always ensure all functions are operation correctly.
2.
Fogged Cds and Lens
This condition may occur when it’s cold. Wipe fogged CDs with a soft
cloth. Fogged optical components inside the unit will return to normal
operation after an hour in a heated environment.
2
5
6
8
7
4
9
3
12
11
10
13
14
15
1
16
17
18
USB
Fig. A
