background image

IMPORTANT SAFETY INSTRUCTIONS

DO NOT DESTROY

HOW TO USE YOUR RENUE

 TENSION 

RELIEVING HEAT THERAPY PAD

Make sure Control Connector is securely connected to the 

Renue

 Pad Connector 

(Figure 1)

. Push both parts together 

for a tight fit. 

NOTE: 

The connectors are keyed to only fit one 

way; align arrow.

1.  Plug into 120V AC electrical outlet.

2.  To turn on, press Push-Button. Renue

 pad will NOT turn 

on until you press the Push-Button.

 NOTE:

 If the heat level 

indicators do not light up or stay on, the plug or Control 

Connector may not be firmly and completely connected. 

Unplug from wall outlet, check the Renue

 pad  

connection again and re-plug into outlet.

3.  Select from 4 heat settings by pressing Push-Button successively to achieve desired heat 

level. 

To turn OFF, you must scroll through the remaining heat settings by pressing 

the Push-Button sequentially.

 

4.  Allow Renue

 pad to preheat for several minutes. Renue

 pad has been designed to meet 

the maximum heat output according to UL Standards.

NOTE:

 A red blinking “High” light indicates an error has occurred. Unplug from outlet, verify 

physical condition of cord, function of AC outlet and proper connection between connector 

and Renue

 Pad. If blinking light persists, discontinue use and contact Consumer Services.

USING MOIST HEAT THERAPY

In some cases, you may find that moist heat therapy provides 

more comfort and tension relief. 

When using moist heat 

therapy, you should protect furniture and clothing from 

becoming damp.

1.  Dampen one side of the Renue

™ 

pad with water by patting 

the surface with a wet sponge or cloth or use a spray bottle 

to apply a fine mist. Do not thoroughly soak Renue

 pad.

2.  Do not spray or dampen the connector. 

(Figure 2)

.

DANGER:

 

Do not immerse Renue

 pad or connector in water or place under running 

water. Failure to comply may result in product failure and/or personal injury.

NOTE:

 The electrical connector must be thoroughly dry before establishing electrical connection.

WASHING INSTRUCTIONS

DO NOT DRY CLEAN! DO NOT USE BLEACH! DO NOT USE WRINGER!

1.  Disconnect Renue

 pad from outlet.

2.  Detach Renue

 pad Connector from Control Connector. 

3.  Machine wash Renue

 pad in cold water on gentle cycle, or hand wash. Tumble dry on 

low heater or line dry.

4.  Do not plug in Renue

 pad until pad connector is completely dry.

AUTO-OFF FEATURE

Your Renue

 controller includes an Auto-Off feature. This feature is designed to conserve 

energy by automatically turning off after 2 hours of continuous use. The red Auto-Off light 

will blink, indicating that this feature has activated. 

NOTE:

 After a power outage, the Auto-Off 

feature automatically resets the timer.

Renue

 Tension 

Relieving Heat Therapy

Model: 885

Congratulations! You have purchased 

Renue

 Tension Relieving Heat Therapy 

Pad. Sit back, relax and start enjoying 

the soothing benefits of Renue

.

Renue

Tension Relieving Heat Therapy is specifically designed to fit the neck and shoulder

area, where users experience the most physical signs of tension and stress. Drape Renue

comfortably on your shoulders making sure that the neck flap is properly in place. Weighted

edges and intergrated magnets help to secure Renue

in place.

NOTE:

This product utilizes magnets to fasten at the neck area. Remove necklaces and other metal

accessories that could become attached to these magnets.

HOW TO USE YOUR RENUE

TENSION

RELIEVING HEAT THERAPY PAD

Make sure Control Connector is securely connected to the

Renue Connector (Figure 1).

Push both parts together for a tight fit. Note: The connectors

are keyed to only fit one way; align arrow.

1. Plug into 120V AC electrical outlet.

2. To turn on, press Push-Button. Renue

will NOT turn on

until you press the Push-Button.

NOTE:

If the heat level

indicators do not light up or stay on, the plug or Control

Connector may not be firmly and completely connected.

Unplug from wall outlet, check the Renue

connection again and re-plug into outlet.

3. Select from 4 heat settings by pressing Push-Button successively to achieve desired heat level.

To turn OFF, you must scroll through the remaining heat settings by pressing the

Push-Button sequentially.

4. Allow Renue

to preheat for several minutes. Renue

has been designed to meet the maximum

heat output according to UL Standards.

NOTE:

A red blinking “High” light indicates an error has occurred. Unplug from outlet, verify

physical condition of cord, function of AC outlet and proper connection between connector and

Renue

Pad. If blinking light persists, discontinue use and contact Consumer Services.

AUTO-OFF FEATURE

Your Renue

controller includes an Auto-Off feature. This feature is designed to conserve energy

by automatically turning off after 2 hours of continuous use. The red Auto-Off light will blink,

indicating that this feature has activated.

NOTE:

After a power outage, the Auto-Off feature

automatically resets the timer.

USING MOIST HEAT THERAPY

In some cases, you may find that moist heat therapy

provides more comfort and tension relief.

When using moist

heat therapy, you should protect furniture and clothing

from becoming damp.

1. Dampen one side of the Renue

with water by patting the

surface with a wet sponge or cloth or use a spray bottle to

apply a fine mist. Do not thoroughly soak Renue

.

2. Do not spray or dampen the connector. (Figure 2).

DANGER: Do not immerse Renue

or connector in water or place under running water.

Failure to comply may result in product failure and/or personal injury.

NOTE:

The electrical connector must be thoroughly dry before establishing electrical connection.

WASHING INSTRUCTIONS

DO NOT DRY CLEAN! DO NOT USE BLEACH! DO NOT USE WRINGER!

1. Disconnect Renue

from outlet.

2. Detach Renue

Connector from Control Connector.

3. Machine wash Renue

pad in cold water on gentle cycle, or hand wash.

Tumble dry on low heater or line dry.

4. Do not plug in Renue

until pad connector is completely dry.

Fig. 2

IMPORTANT SAFETY INSTRUCTIONS

DO NOT DESTROY

WARNING:

THIS PRODUCT CONTAINS MAGNETS. DO NOT USE IF YOU

HAVE A PACEMAKER, ICD (implantable cardioverter defibrillator) OR AN

INTERNAL INSULIN PUMP.

DANGER:

TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE, AND

PERSONAL INJURY, THIS PRODUCT MUST BE USED IN ACCORDANCE WITH

THE FOLLOWING INSTRUCTIONS:

1. READ ALL INSTRUCTIONS.

2. DO NOT USE WHILE SLEEPING.

3. DO NOT USE ON AN INFANT OR ON AN ANIMAL.

4. THIS PRODUCT IS NOT TO BE USED ON OR BY AN INVALID, A SLEEPING

OR UNCONSCIOUS PERSON, A PERSON WITH DIABETES, OR A PERSON

WITH POOR BLOOD CIRCULATION.

5. DO NOT USE ON AREAS OF INSENSITIVE SKIN.

6. BURNS CAN OCCUR REGARDLESS OF CONTROL SETTING.

CHECK SKIN UNDER PRODUCT FREQUENTLY.

7. DO NOT USE IN AN OXYGEN ATMOSPHERE.

8. DO NOT USE PINS OR OTHER METALLIC MEANS TO FASTEN

THIS PRODUCT IN PLACE.

9. DO NOT SIT ON OR AGAINST OR CRUSH PRODUCT– AVOID SHARP FOLDS.

10. NEVER PULL THIS PRODUCT BY THE SUPPLY CORD.

11. DO NOT USE THE CORD AS A HANDLE.

12. THIS UNIT SHOULD NOT BE USED BY CHILDREN WITHOUT

ADULT SUPERVISION.

13. PLACE PRODUCT ON TOP OF AND NOT UNDER THE PART OF THE BODY

NEEDING HEAT.

14. USE THIS PRODUCT ONLY ON A 110-120 VOLT AC CIRCUIT. UNPLUG

WHEN NOT IN USE.

15. DO NOT TAMPER WITH THIS PRODUCT IN ANY WAY.

16. THERE ARE NO USER-SERVICEABLE PARTS. IF FOR ANY REASON

THIS PRODUCT DOES NOT FUNCTION SATISFACTORILY, SEE WARRANTY

FOR CONSUMER SERVICE INFORMATION.

17. DO NOT USE THIS PRODUCT WITH LINIMENT, SALVE OR OINTMENT

PREPARATIONS. SKIN BURNS COULD RESULT.

18. DO NOT BEND OR PINCH CORD AND DO NOT USE IF CORD IS DAMAGED.

19. NEVER LEAVE THE PRODUCT UNATTENDED, ESPECIALLY IF

CHILDREN ARE PRESENT.

20. LOOP CORD LOOSELY WHEN STORING. TIGHT WRAPPING MAY DAMAGE

CORD AND INTERNAL PARTS.

21. SAVE THESE INSTRUCTIONS.
This product has a polarized plug (one blade is wider than the other). This

plug fits a polarized outlet only one way; if the plug does not fit fully into the

outlet, reverse the plug. If it still does not fit, contact a qualified electrician.

DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE.

2-YEAR LIMITED WARRANTY

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation

(Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period

of two years from the date of purchase, this product will be free from defects in material and workmanship. JCS,

at its option, will repair or replace this product or any component of the product found to be defective during the

warranty period. Replacement will be made with a new or remanufactured product or component. If the product

is no longer available, replacement may be made with a similar product of equal or greater value. This is your

exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product.

Doing so will void this warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not

transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS

dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way

change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or

misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly,

repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not

cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on JCS’s Liability?

JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied

or statutory warranty or condition.

Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness

for a particular purpose is limited in duration to the duration of the above warranty.

JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.

JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability

to use the product including incidental, special, consequential or similar damages or loss of profits, or for any

breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.

Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages

or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights that vary from province to

province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A.

- If you have any question regarding this warranty or would like to obtain warranty service, please

call 1-800-435-1250 and a convenient service center address will be provided to you.

In Canada,

- If you have any question regarding this warranty or would like to obtain warranty service, please call

1-800-667-8623 and a convenient service center address will be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions

located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited

doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you

have any other problem or claim in connection with this product, please write our Consumer Service Department.

PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

©2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Distributed by

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.

Printed in the China

SPR-062008

P.N. 124395

www.sunbeam.com

Renue

Tension Relieving Heat Therapy

Congratulations! You have purchased

Renue

Tension Relieving Heat Therapy. Sit back, relax

and start enjoying the soothing benefits of Renue

.

Model 885

1

1

3

2

2

4

Fig. 1

1. Control Connector

2. Renue

Connector

3. Locking Clips

4. Alignment Arrows

THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER). TO REDUCE 

THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLARIZED OUTLET ONLY 

ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL 

DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THE PROPER OUTLET.

DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY 

FEATURE IN ANY WAY.

www.sunbeam.com

2-YEAR LIMITED WARRANTY

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing 

business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of 2 years from the date of purchase, this product 

will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product 

found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the 

product is no longer available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. 

Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty. This warranty is 

valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of 

purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right 

to alter, modify or any way change the terms and conditions of this warranty. This warranty does not cover normal wear of parts or damage 

resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating 

instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not 

cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on JCS’s Liability?

JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or 

condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular 

purpose is limited in duration to the duration of the above warranty.

JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. JCS shall not be liable for any 

damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential 

or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser 

by any other party. Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages 

or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you. This warranty gives you 

specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A.

 - If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-435-1250 and a 

convenient service center address will be provided to you.

In Canada, 

- If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-667-8623 and a 

convenient service center address will be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in Boca Raton, Florida 

33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located 

at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or claim in connection with this product, please write 

our Consumer Service Department.

PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

©2014 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Distributed by Sunbeam Products, Inc. doing 

business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
Printed in China. 

DW-031714 

 

PN: 124395-1

Renue

 Tension Relieving Heat Therapy is specifically designed to fit the neck 

and shoulder area, where users experience the most physical signs of tension 

and stress. Drape Renue

 comfortably on your shoulders making sure that the 

neck flap is properly in place. Weighted edges and intergrated magnets help to 

secure Renue

 in place.

NOTE:

 

This product utilizes magnets to fasten at the neck area. Remove necklaces 

and other metal accessories that could become attached to these magnets.

Renue

Tension Relieving Heat Therapy is specifically designed to fit the neck and shoulder

area, where users experience the most physical signs of tension and stress. Drape Renue

comfortably on your shoulders making sure that the neck flap is properly in place. Weighted

edges and intergrated magnets help to secure Renue

in place.

NOTE:

This product utilizes magnets to fasten at the neck area. Remove necklaces and other metal

accessories that could become attached to these magnets.

HOW TO USE YOUR RENUE

TENSION

RELIEVING HEAT THERAPY PAD

Make sure Control Connector is securely connected to the

Renue Connector (Figure 1).

Push both parts together for a tight fit. Note: The connectors

are keyed to only fit one way; align arrow.

1. Plug into 120V AC electrical outlet.

2. To turn on, press Push-Button. Renue

will NOT turn on

until you press the Push-Button.

NOTE:

If the heat level

indicators do not light up or stay on, the plug or Control

Connector may not be firmly and completely connected.

Unplug from wall outlet, check the Renue

connection again and re-plug into outlet.

3. Select from 4 heat settings by pressing Push-Button successively to achieve desired heat level.

To turn OFF, you must scroll through the remaining heat settings by pressing the

Push-Button sequentially.

4. Allow Renue

to preheat for several minutes. Renue

has been designed to meet the maximum

heat output according to UL Standards.

NOTE:

A red blinking “High” light indicates an error has occurred. Unplug from outlet, verify

physical condition of cord, function of AC outlet and proper connection between connector and

Renue

Pad. If blinking light persists, discontinue use and contact Consumer Services.

AUTO-OFF FEATURE

Your Renue

controller includes an Auto-Off feature. This feature is designed to conserve energy

by automatically turning off after 2 hours of continuous use. The red Auto-Off light will blink,

indicating that this feature has activated.

NOTE:

After a power outage, the Auto-Off feature

automatically resets the timer.

USING MOIST HEAT THERAPY

In some cases, you may find that moist heat therapy

provides more comfort and tension relief.

When using moist

heat therapy, you should protect furniture and clothing

from becoming damp.

1. Dampen one side of the Renue

with water by patting the

surface with a wet sponge or cloth or use a spray bottle to

apply a fine mist. Do not thoroughly soak Renue

.

2. Do not spray or dampen the connector. (Figure 2).

DANGER: Do not immerse Renue

or connector in water or place under running water.

Failure to comply may result in product failure and/or personal injury.

NOTE:

The electrical connector must be thoroughly dry before establishing electrical connection.

WASHING INSTRUCTIONS

DO NOT DRY CLEAN! DO NOT USE BLEACH! DO NOT USE WRINGER!

1. Disconnect Renue

from outlet.

2. Detach Renue

Connector from Control Connector.

3. Machine wash Renue

pad in cold water on gentle cycle, or hand wash.

Tumble dry on low heater or line dry.

4. Do not plug in Renue

until pad connector is completely dry.

Fig. 2

IMPORTANT SAFETY INSTRUCTIONS

DO NOT DESTROY

WARNING:

THIS PRODUCT CONTAINS MAGNETS. DO NOT USE IF YOU

HAVE A PACEMAKER, ICD (implantable cardioverter defibrillator) OR AN

INTERNAL INSULIN PUMP.

DANGER:

TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, FIRE, AND

PERSONAL INJURY, THIS PRODUCT MUST BE USED IN ACCORDANCE WITH

THE FOLLOWING INSTRUCTIONS:

1. READ ALL INSTRUCTIONS.

2. DO NOT USE WHILE SLEEPING.

3. DO NOT USE ON AN INFANT OR ON AN ANIMAL.

4. THIS PRODUCT IS NOT TO BE USED ON OR BY AN INVALID, A SLEEPING

OR UNCONSCIOUS PERSON, A PERSON WITH DIABETES, OR A PERSON

WITH POOR BLOOD CIRCULATION.

5. DO NOT USE ON AREAS OF INSENSITIVE SKIN.

6. BURNS CAN OCCUR REGARDLESS OF CONTROL SETTING.

CHECK SKIN UNDER PRODUCT FREQUENTLY.

7. DO NOT USE IN AN OXYGEN ATMOSPHERE.

8. DO NOT USE PINS OR OTHER METALLIC MEANS TO FASTEN

THIS PRODUCT IN PLACE.

9. DO NOT SIT ON OR AGAINST OR CRUSH PRODUCT– AVOID SHARP FOLDS.

10. NEVER PULL THIS PRODUCT BY THE SUPPLY CORD.

11. DO NOT USE THE CORD AS A HANDLE.

12. THIS UNIT SHOULD NOT BE USED BY CHILDREN WITHOUT

ADULT SUPERVISION.

13. PLACE PRODUCT ON TOP OF AND NOT UNDER THE PART OF THE BODY

NEEDING HEAT.

14. USE THIS PRODUCT ONLY ON A 110-120 VOLT AC CIRCUIT. UNPLUG

WHEN NOT IN USE.

15. DO NOT TAMPER WITH THIS PRODUCT IN ANY WAY.

16. THERE ARE NO USER-SERVICEABLE PARTS. IF FOR ANY REASON

THIS PRODUCT DOES NOT FUNCTION SATISFACTORILY, SEE WARRANTY

FOR CONSUMER SERVICE INFORMATION.

17. DO NOT USE THIS PRODUCT WITH LINIMENT, SALVE OR OINTMENT

PREPARATIONS. SKIN BURNS COULD RESULT.

18. DO NOT BEND OR PINCH CORD AND DO NOT USE IF CORD IS DAMAGED.

19. NEVER LEAVE THE PRODUCT UNATTENDED, ESPECIALLY IF

CHILDREN ARE PRESENT.

20. LOOP CORD LOOSELY WHEN STORING. TIGHT WRAPPING MAY DAMAGE

CORD AND INTERNAL PARTS.

21. SAVE THESE INSTRUCTIONS.
This product has a polarized plug (one blade is wider than the other). This

plug fits a polarized outlet only one way; if the plug does not fit fully into the

outlet, reverse the plug. If it still does not fit, contact a qualified electrician.

DO NOT ATTEMPT TO DEFEAT THIS SAFETY FEATURE.

2-YEAR LIMITED WARRANTY

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation

(Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period

of two years from the date of purchase, this product will be free from defects in material and workmanship. JCS,

at its option, will repair or replace this product or any component of the product found to be defective during the

warranty period. Replacement will be made with a new or remanufactured product or component. If the product

is no longer available, replacement may be made with a similar product of equal or greater value. This is your

exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product.

Doing so will void this warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not

transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS

dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way

change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or

misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly,

repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not

cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on JCS’s Liability?

JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied

or statutory warranty or condition.

Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness

for a particular purpose is limited in duration to the duration of the above warranty.

JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.

JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability

to use the product including incidental, special, consequential or similar damages or loss of profits, or for any

breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.

Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages

or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights that vary from province to

province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A.

- If you have any question regarding this warranty or would like to obtain warranty service, please

call 1-800-435-1250 and a convenient service center address will be provided to you.

In Canada,

- If you have any question regarding this warranty or would like to obtain warranty service, please call

1-800-667-8623 and a convenient service center address will be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions

located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited

doing business as Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you

have any other problem or claim in connection with this product, please write our Consumer Service Department.

PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

©2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Distributed by

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.

Printed in the China

SPR-062008

P.N. 124395

www.sunbeam.com

Renue

Tension Relieving Heat Therapy

Congratulations! You have purchased

Renue

Tension Relieving Heat Therapy. Sit back, relax

and start enjoying the soothing benefits of Renue

.

Model 885

1

1

3

2

2

4

Fig. 1

1. Control Connector

2. Renue

Connector

3. Locking Clips

4. Alignment Arrows

WARNING:

 THIS PRODUCT CONTAINS MAGNETS. DO 

NOT USE IF YOU HAVE A PACEMAKER, ICD (implantable 

cardioverter defibrillator) OR AN INTERNAL INSULIN PUMP. 

DANGER:

 TO REDUCE RISKS OF BURNS, ELECTRIC SHOCK, 

FIRE, AND PERSONAL INJURY, THIS PRODUCT MUST BE USED IN 

ACCORDANCE WITH THE FOLLOWING INSTRUCTIONS:

1.  READ ALL INSTRUCTIONS.

2.  DO NOT USE WHILE SLEEPING.

3.  DO NOT USE ON AN INFANT OR ON AN ANIMAL.

4.  THIS PRODUCT IS NOT TO BE USED ON OR BY AN INVALID, 

A SLEEPING OR UNCONSCIOUS PERSON, A PERSON 

WITH DIABETES, OR A PERSON WITH POOR BLOOD 

CIRCULATION.

5.  DO NOT USE ON AREAS OF INSENSITIVE SKIN.

6.  BURNS CAN OCCUR REGARDLESS OF CONTROL SETTING. 

CHECK SKIN UNDER PRODUCT FREQUENTLY.

7.  DO NOT USE IN AN OXYGEN ATMOSPHERE.

8.  DO NOT USE PINS OR OTHER METALLIC MEANS TO 

FASTEN THIS PRODUCT IN PLACE.

9.  DO NOT SIT ON OR AGAINST OR CRUSH PRODUCT– AVOID 

SHARP FOLDS.

10.  NEVER PULL THIS PRODUCT BY THE SUPPLY CORD.

11.  DO NOT USE THE CORD AS A HANDLE.

12.  THIS UNIT SHOULD NOT BE USED BY CHILDREN WITHOUT 

ADULT SUPERVISION.

13.  PLACE PRODUCT ON TOP OF AND NOT UNDER THE PART 

OF THE BODY NEEDING HEAT.

14.  USE THIS PAD ONLY ON A 110-120 VOLT AC CIRCUIT. 

UNPLUG WHEN NOT IN USE. DO NOT USE WITH 

GENERATORS, POWER CONVERTERS, OR INVERTERS.

15.  DO NOT TAMPER WITH THIS PRODUCT IN ANY WAY. 

16.  THERE ARE NO USER-SERVICEABLE PARTS. IF FOR 

ANY REASON THIS PRODUCT DOES NOT FUNCTION 

SATISFACTORILY, SEE WARRANTY FOR CONSUMER 

SERVICE INFORMATION.

17.  DO NOT USE THIS PRODUCT WITH LINIMENT, SALVE OR 

OINTMENT PREPARATIONS. SKIN BURNS COULD RESULT.

18.  DO NOT BEND OR PINCH CORD AND DO NOT USE IF CORD 

IS DAMAGED.

19.  NEVER LEAVE THE PRODUCT UNATTENDED, ESPECIALLY IF 

CHILDREN ARE PRESENT.

20.  LOOP CORD LOOSELY WHEN STORING. TIGHT WRAPPING 

MAY DAMAGE CORD AND INTERNAL PARTS.

21.  SAVE THESE INSTRUCTIONS.

1.  Control Connector

2.  Renue

 Connector

3.  Locking Clips

4.  Alignment Arrows

Reviews: