DANGER:
TO REDUCE RISKS OF BURNS, ELECTRIC
SHOCK, FIRE, AND PERSONAL INJURY, THIS PRODUCT
MUST BE USED IN ACCORDANCE WITH THE FOLLOWING
INSTRUCTIONS:
1. READ ALL INSTRUCTIONS.
2. DO NOT USE WHILE SLEEPING.
3. DO NOT USE ON AN INFANT OR ON AN ANIMAL.
4. THIS PAD IS NOT TO BE USED ON OR BY AN INVALID,
A SLEEPING OR UNCONSCIOUS PERSON, A PERSON
WITH DIABETES, OR A PERSON WITH POOR BLOOD
CIRCULATION.
5. DO NOT USE ON AREAS OF INSENSITIVE SKIN.
6. BURNS CAN OCCUR REGARDLESS OF CONTROL SETTING.
CHECK SKIN UNDER PAD FREQUENTLY.
7. DO NOT USE IN AN OXYGEN ATMOSPHERE.
8. DO NOT USE PINS OR OTHER METALLIC MEANS TO
FASTEN THIS PAD IN PLACE.
9. DO NOT SIT ON OR AGAINST OR CRUSH PAD - AVOID
SHARP FOLDS.
10. NEVER PULL THIS PAD BY THE SUPPLY CORD.
11. DO NOT USE THE CORD AS A HANDLE.
12. CAREFULLY EXAMINE INNER COVER BEFORE EACH USE.
DISCARD THE PAD IF INNER COVER SHOWS ANY SIGNS
OF DETERIORATION.
13. NEVER USE PAD WITHOUT THE REMOVABLE COVER IN
PLACE.
14. THIS UNIT SHOULD NOT BE USED BY CHILDREN WITHOUT
ADULT SUPERVISION.
15. PLACE PAD ON TOP OF AND NOT UNDER THE PART OF
THE BODY NEEDING HEAT.
16. USE THIS PAD ONLY ON A 110-120 VOLT AC CIRCUIT.
UNPLUG WHEN NOT IN USE. DO NOT USE WITH
GENERATORS, POWER CONVERTERS, OR INVERTERS.
17. DO NOT TAMPER WITH THIS PAD IN ANY WAY.
18. THERE ARE NO USER-SERVICEABLE PARTS. IF FOR ANY
REASON THIS PAD DOES NOT FUNCTION SATISFACTORILY,
SEE WARRANTY FOR CONSUMER SERVICE INFORMATION.
19. DO NOT USE THIS PAD WITH LINIMENT, SALVE OR
OINTMENT PREPARATIONS, ESPECIALLY ONES THAT
CONTAIN HEAT-PRODUCING INGREDIENTS. SKIN BURNS
COULD RESULT.
20. DO NOT BEND OR PINCH CORD AND DO NOT USE IF CORD
IS DAMAGED.
21. NEVER LEAVE THE APPLIANCE UNATTENDED, ESPECIALLY
IF CHILDREN ARE PRESENT.
22. LOOP CORD LOOSELY WHEN STORING. TIGHT WRAPPING
MAY DAMAGE CORD AND INTERNAL PARTS.
23. SAVE THESE INSTRUCTIONS.
HOW TO USE YOUR HEATING PAD
1. Lay the Machine Washable Cover on a flat surface with the printing face up.
Insert the pad into the cover, feeding the controller and cord through the
opening. Make sure the cord and controller remain on the outside of the cover.
WARNING: Never use the warming pad without the cloth cover.
2. Plug into any 120V AC electrical outlet.
3. To turn the pad on, set controller to the desired heat setting.
4. To turn the pad off, slide the controller setting to OFF.
5. FOR MODELS WITH AUTO OFF FEATURE: The Auto-Off feature is indicated by a LED
light in the upper left corner of the controller
(Figure 1, E)
. The LED light is red
when the heating pad is turned on. The Auto-Off function will shut the heating pad
down automatically after 2 hours of continuous use and the LED light will go off.
THIS APPLIANCE HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER). TO REDUCE
THE RISK OF ELECTRIC SHOCK, THIS PLUG IS INTENDED TO FIT IN A POLARIZED OUTLET ONLY
ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG. IF IT STILL
DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN TO INSTALL THE PROPER OUTLET.
DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS
SAFETY FEATURE IN ANY WAY.
Figure 1
A. Machine Washable Cover
B. Moist Heat Sponge
C. Vinyl Pad
D. 3 or 4 Heat Settings
Controller
E. Auto-Off Indicator
B
D
C
E
USING MOIST HEAT THERAPY
FOR MODELS THAT INCLUDE A MOIST HEAT SPONGE -
When using moist heat
therapy, you should protect furniture and clothing from becoming damp.
1. Run warm water over the Moist Heat Sponge until it is thoroughly saturated.
2. Gently wring out excess water.
3. Place the sponge on top of the vinyl heating pad and slip the
cloth cover over the heating pad. Snap the cover closed.
DANGER: Do not immerse pad in water or place under running water to dampen
surface. Failure to comply may result in personal injury.
Moist / Dry Heating Pad
Models: 720-610/905, 731-500, 732-500, 756-500, 764-511, and 832-915
5-YEAR LIMITED WARRANTY
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada)
Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of five years from the
date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace
this product or any component of the product found to be defective during the warranty period. Replacement will be made
with a new or remanufactured product or component. If the product is no longer available, replacement may be made with a
similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or
mechanical functions on this product. Doing so will void this warranty. This warranty is valid for the original retail purchaser
from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to
obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter,
modify or any way change the terms and conditions of this warranty. This warranty does not cover normal wear of parts or
damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use
contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service
center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.
What are the limits on JCS’s liability?
JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory
warranty or condition. Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability
or fitness for a particular purpose is limited in duration to the duration of the above warranty.
JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise. JCS shall not be
liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including
incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or
otherwise, or for any claim brought against purchaser by any other party. Some provinces, states or jurisdictions do not allow
the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so
the above limitations or exclusion may not apply to you. This warranty gives you specific legal rights, and you may also have
other rights that vary from province to province, state to state or jurisdiction to jurisdiction.
How to Obtain Warranty Service
In the U.S.A.
- If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-435-1250
and a convenient service center address will be provided to you.
In Canada
- If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-667-8623
and a convenient service center address will be provided to you.
In the U.S.A., this warranty is offered by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions located in
Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as
Jarden Consumer Solutions, located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1. If you have any other problem or
claim in connection with this product, please write our Consumer Service Department.
PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
Due to continuing product development, the product you purchased might differ slightly from the one shown and described above.
FABRIC COVER WASHING
INSTRUCTIONS
DO NOT DRY CLEAN! DO NOT BLEACH!
DO NOT USE WRINGER!
1. Disconnect pad from outlet.
2. Remove cover from pad.
(Figure 2)
3. Machine wash in cool water on gentle
cycle, or hand wash. Use mild detergent.
4. Hang to dry or machine dry on gentle,
cool cycle.
(Figure 3)
Figure 3
Figure 2
www.sunbeam.com
1-800-458-8407
©2015 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Distributed by Sunbeam
Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
Printed in China.
DW-111915
PN: 171567-3
A
IMPORTANT SAFETY INSTRUCTIONS
DO NOT DESTROY
