22
Sun Dual 10GbE SFP+ PCIe ExpressModule User’s Guide • May 2010
▼
To Configure the Network Host Files by
Creating
/etc/hostname.ixgbe
#
Files
Note –
Use this procedure to configure the network host files permanently. The new
settings will be restored at each reboot.
1. Create a file named
/etc/hostname.ixgbe
#
for each ixgbe interface.
Where
#
is the interface’s instance number.
2. Edit the
/etc/hosts
file to include an IP address and host name for each
ixgbe
interface.
3. Boot the Solaris OS.
The
ixgbe
interfaces will be plumbed up automatically when you boot.
▼
To Configure the Network Host Files Using the
ifconfig
Command
Note –
Use this procedure to configure the network host files dynamically on the
command line. At reboot, the settings will revert.
1. Create a file named
/etc/hostname.ixgbe
#
for each ixgbe interface, where
#
is the ixgbe interface instance number you plan to use.
For example, to bring up ixgbe0 at boot, create a file called
/etc/hostname.ixgbe0
, where 0 is the number of the ixgbe interface. If the
instance number were 1, the filename would be
/etc/hostname.ixgbe1
. The
/etc/hostname.ixgbe
#
file must contain the host name for the appropriate
ixgbe interface.
2. At the command line, use the
dladm
command to get the
ixgbe
instances:
The output might include lines similar to the following:
# dladm show-dev
ixgbe0 link: up speed: 10000 Mbps duplex: full
nge0 link: up speed: 1000 Mbps duplex: full
nge1 link: down speed: 0 Mbps duplex: unknown
ixgbe1 link: up speed: 10000 Mbps duplex: full
ixgbe2 link: up speed: 10000 Mbps duplex: full
Summary of Contents for Sun Dual 10GbE SFP+ PCIe ExpressModule
