Sun Oracle Sun Blade 6048, Product Notes

Page: 27 / 42

Chapter 3 ILOM Notes and Issues 19
Workaround
After ILOM boots, reset the CMM with one of the following:
■
CLI: Execute the
reset /CH/CMM
command
■
Web interface: Select /CH/CMM in the Reset Components sub-tab on the
Maintenance tab
The CMM will reboot with the correct product information.
Issues Specific to ILOM 2.0.3.10
The issues in this section are specific to the ILOM 2.0.3.10 on the Sun Blade 6048
modular system.
Cannot Set Netmask When Running ILOM 2.0.3.10
(6766379)
If you are running ILOM version 2.0.3.10, you will not be able to set the CMM
netmask through the CMM ILOM.
Workaround
To set the netmask, you can manually edit the
/conf/interfaces
file via the
sunservice account or by using the Linux
ifconfig
command.
ifconfig eth0 netmask AA.BB.CC.DD
where AA.BB.CC.DD is the desired subnet mask (for example 255.255.0.0).
Issues Specific to ILOM 2.0.3.3
The issues in this section are specific to the ILOM 2.0.3.3 on the Sun Blade 6048
modular system.