E20425-01 •
Chapter 4 Commands
67
Implementation Requirements
■
Implementation Requirements
The initiator sends commands to the target using Command Descriptor Blocks
(CDBs). The CDBs contain a format that includes:
•
Operation code
•
Command parameters
•
Control byte
For some commands, a list of parameters accompanies the request during
subsequent FCP_DATA Information Units.
For all commands, if there is an invalid parameter in the Command Descriptor
Block, then the device terminates the command without altering the medium
or executing the command.
Notes:
•
The CDB Field in Byte 1, Bits 7-5, which was the LUN Field is now
reserved. The drive will ignore this field.
•
RSVD indicates that “bit” is reserved.
Summary of Contents for Storage Tek T10000
Page 14: ...Tables xiv T10000 Interface Reference Manual January 2011 E20425 01...
Page 18: ...What s New xx T10000 Interface Reference Manual January 2011 E20425 01...
Page 82: ...Private Loop SCSI Target Discovery 64 T10000 Interface Reference Manual January 2011 E20425 01...
Page 286: ...Glossary 268 T10000 Interface Reference Manual January 2011 E20425 01...
