1
Introduction
Description
The Continuous Radon Monitor is a detection device used to measure the
concentration of radon gas. The unit is designed for professional inspectors to
use in homes and buildings. The device is EPA verified and radon proficiency
programs approved.
Parts
Unpack the radon monitor and identify the parts described below.
Figure 1. Parts Furnished with 1028 Radon Monitor
Note:
Save the packing material so it can be used when sending the
radon monitor to Sun Nuclear Corporation for annual re-calibration.
No.
Part Number
Description
1
1028300
Model 1028 Radon Monitor*
2
801041Z**
Cable, USB A-B M, 2 m
3
741011***
Power supply, 18 VDC, 100-240 VAC, 0.3A
—
0200014
Radon Customer Support Site letter (not shown)
—
1028012
Getting Started Guide (not shown)
* Model 1029 Radon Monitor is obsolete.
**Z indicates a RoHS2 compliant part.
***Power supply P/N 741011 is only included with Model 1028 Radon Monitors shipped
within the United States.
1
2
3
