14
To enter parameter data using the front panel keys on the radon monitor:
1
Turn on unit.
2
Press “Setup” (button 2).
3
Advance through the list by pressing “Save” (4).
4
Stop on an item to change it.
5
Press “Edit” (3) to edit the item.
6
Press the arrow keys to scroll through a list of available characters and stop
when the desired character appears. Press and hold arrow key for fast scroll.
7
When a desired character to change appears, press “Edit” (3) again to
change it.
8
When all the characters are changed, press “Edit” to complete the item.
9
Press “Save” and advance to the next item.
Character Set
The available character set includes the following in the sequence shown:
(space) ! “ # $ % & ‘ ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E
F G H I J K L M N O P Q R S T U V W X Y Z [ \ ] ^ _ ‘ a b c d e f g h i j k l m n
o p q r s t u b w x y z
Display Turns Off Automatically
The display turns off automatically after a period of inactivity of about 2-3
minutes. There is no OFF switch or key sequence.
and
UNITS pC/l
Select units, pCi/l or Bq/m
3
(edit, select with
arrows, and SAVE (4)).
and
PIN NUM 1111
Enter a PIN number if desired in the range of 1111
to 4444 and SAVE. The number 1111 is equivalent
to no PIN. To clear a PIN, enter 1111.
Setup Menu Done
End of setup menu.
Press…
Display Shows…
Comment
