Sun Microsystems XVR-500, Installation Manual

Page: 49 / 50

37
A P P E N D I X
B
Setting the Default Console Display
for the Sun Blade 1000 and 2000
System
s
These instructions describe how to set the Sun XVR-500 graphics accelerator as the
default monitor console display for Sun Blade 1000 and Sun Blade 2000 systems
only.
1. At the
ok
prompt, type:
Information similar to the text below will be displayed:
2. Select the graphics board you want to be the default console display.
In the above example, you type
b
for the Sun XVR-500 graphics accelerator.
ok show-displays
a) /pci@1f,0/SUNW,m64B@13
b) /pci@1f,0/pci@5/SUNW,XVR-500@1
q) NO SELECTION
Enter Selection, q to quit: b
/pci@1f,0/pci@5/SUNW,XVR-500@1 has been selected.
Type ^Y ( Control-Y ) to insert it in the command line.
e.g. ok nvalias mydev ^Y
for creating devalias mydev for
/pci@1f,0/pci@5/SUNW,XVR-500@1
ok nvalias mydev /pci@1f,0/pci@5/SUNW,XVR-500@1
ok setenv output-device mydev
output-device = mydev