Sun Microsystems x4422a User Manual Download Page 42

Page: 42 / 96

Sun Dual Gigabit Ethernet and Dual SCSI/P Adapter Installation and User’s Guide • January 2004

Example 3: Packages Missing

Following is an example of an installation script output if the package(s) are not
found:

A log of this Install can be found at:

/var/tmp/GigaSwift.install.2003.11.17.1213

CODE EXAMPLE 2-3

Script Output When Packages Are Not Found

Product Installation

1 - Dual Gigabit Ethernet Dual SCSI/P Adapter

2 - GigaSwift Ethernet Adapter (copper/fiber)

3 - GigaSwift Ethernet Compact PCI Adapter

4 - Quad GigaSwift Ethernet Adapter

Please select the product to install: 1

Dual GigaSwift Ethernet Adapter Driver Installation.

Use is subject to license terms.

*** Checking for correct version of GigaSwift Ethernet Driver

Packages...

*** Checking for correct version of VLAN Utility Driver Packages..

The following supporting driver(s) can be used with Dual GigaSwift

Ethernet Adapter

Driver:

VLAN Utility Driver software

Install the Optional VLAN Utility Driver Software [y,n,?,q] y

This script is about to take the following actions:

- Install Dual GigaSwift Ethernet Adapter Driver packages.

- Optionally Install VLAN Utility Driver Software.

Press return to continue, or 'Q' followed by a return to quit:

*** Installing Sun GigaSwift Ethernet packages...

Use is subject to license terms.

CODE EXAMPLE 2-2

Script Output When Packages Require Patches (Continued)

Summary of Contents for x4422a

































































































Search results

Summary of Contents for x4422a

Reviews:

Related manuals for x4422a

Brands by name

Popular brands

Sun Microsystems x4422a, User Manual

Search results

Summary of Contents for x4422a

Reviews:

Related manuals for x4422a

Brands by name

Popular brands