12
Sun Ultra 40 M2 Workstation Operating System Installation Guide • November 2006
5. Eject the CD.
6. Reboot the server.
7. When prompted for networking information on your system, enter the
networking information for your server.
Installing Windows XP Operating System Drivers
The Sun Ultra 40 M2 Workstation Tools and Drivers CD contains NVRAID, NVIDIA
display, and NVIDIA chipset drivers for Windows XP. If you are installing NVRAID
drivers, you will need to use the XpReburn script to create a new Windows XP CD
containing the necessary drivers or create a boot diskette to install the drivers
before
installing the Windows XP operating system.
The order of Windows XP driver installation is as follows:
1. If you plan to use the workstation RAID functionality, install the NVRAID drivers
before
installing the operating system by using one of the following methods:
■
“Installing RAID Drivers Using the XPReburn Script” on page 13
■
“Installing RAID Drivers Using a Boot Diskette” on page 14
.
2. Install the operating system.
3. Using the Tools and Drivers CD, install the display and chipset drivers as
described in
“Installing NVIDIA Display and Chipset Drivers for Windows XP”
4. If necessary, install the Infineon TPM and RealTek audio drivers as described in
“Installing Infineon TPM and RealTek Audio Drivers” on page 17
.
5. If necessary, enable SLI support. See
“Configuring SLI Support” on page 29
Note –
The Tools and Drivers CD does not mount the diagnostic partition for
Windows XP software.
