Sun Microsystems Ultra 1 140, Service Manual

Page: 66 / 176

5-2 Electron Service Manual—November 1995
5
Warning – Hazardous voltages are present. To reduce the risk of electric shock
and danger to personal health, follow the instructions.
Caution – Hot surfaces. Avoid contact. Surfaces are hot and may cause
personal injury if touched.
5.3 Safety Precautions
5.3.1 Modification to Equipment
Caution –
Do not make mechanical or electrical modifications to the
equipment. Sun Microsystems, Inc. is not responsible for regulatory
compliance of a modified Sun product.
5.3.2 Placement of a Sun Product
Caution – To ensure reliable operation of your Sun product and to protect it
from overheating, openings in the equipment must not be blocked or covered.
A Sun product should never be placed near a radiator or hot air register.
5.3.3 Power Cord Connection
Warning – Not all power cords have the same current ratings. Household
extension cords do not have overload protection. Do not use household
extension cords with your Sun product.
Warning – The power switch of this product functions as a standby type
device only. The power cord serves as the primary disconnect device for the
system. Be sure to plug the power cord into a grounded power outlet that is
nearby the system and is readily accessible. Do not connect the power cord
when the power supply has been removed from the system chassis.
!
!