Sun Microsystems SunSwift SPARCserver 1000, Installation Manual

Page: 49 / 70

General Rules for System Configuration A-5
A
Figure A-3 SIMMs and NVSIMM
The system board has 16 SIMM sockets physically divided into two rows of
eight. The SIMMs are also logically divided into four groups of four, known as
group 0, 1, 2, and 3. Figure A-4 shows SIMM locations and identifies groups.
A system board can be installed with zero memory or from one to all four
groups filled. For example, 0 SIMMs, 4 SIMMs, 8 SIMMs, 12 SIMMs or 16
SIMMs. When installing memory, first install all group 0 SIMMs on all system
boards, from the lowest board slot number to the highest. Then, install group 1
SIMMs in the same order, followed by groups 2 and 3 if there for all remaining
SIMMs.
1 34 35 68
1 2 12 18 3 9 5 10 11
CBS2
CBS4
SIMM — Vendor 1
Capacity Type P/N
8 Mbyte DRAM 501-1817
32 Mbyte DRAM 501-2196
SIMM — Vendor 2
Capacity Type P/N
8 Mbyte DRAM 501-1817
32 Mbyte DRAM 501-2196
NVSIMM
Capacity Type P/N
1Mbyte NVSIMM 501-2197
1 1 1 1 1 1 1 1 1
34 35 68
60P 63P
9P 13P
65P
67P
59P 4P 7P
1 1 1 1 1 1 1 1 1
CBS - 11P
CBS - 22P
1
1 34 35 68