Sun Microsystems Sun Fire V490, Setup And Rackmounting Manual, Page: 54 / 64

44 Sun Fire V490 Server Setup and Rackmounting Guide • August 2004
Connect a Twisted-Pair Ethernet Cable
Connect the twisted-pair Ethernet (TPE) cable to one of the Ethernet ports on
the back panel. Each network interface configures itself automatically for
either 10-Mbps, 100-Mbps, or 1000-Mbps operation depending on network
characteristics.
1. Choose a network port, using the following table as a guide.
Select the correct TPE connector for the interface you are installing. The server comes
with two TPE connectors on the back panel and one on the system controller card.
Your server may also include one or more TPE connectors provided via PCI Ethernet
interface cards.
Ethernet Port PCI Bus/Clock Rate
OBP
Devalias
Device Path
1 PCI C/66 MHz net1 /pci@9, 600000/network@1
0 PCI D/33 MHz net0 /pci@9, 700000/network@2