Sun Microsystems StorEdge, Troubleshooting Manual

Page: 79 / 168

Chapter 4 Troubleshooting Example 61
Verify the Fix
The Storage Automated Diagnostics Environment has identified the SFP as the most
likely suspect. It suggests reconnecting the link and re-running the
linktest
to
verify the results. You could also run the
switchtest
to stress the link with the
number of test Fibre Channel frames.
1. Issue the
cfgadm -al
command.
The output of the
cfgadm -al
command indicates that the device is back in the
Fabric. Note that both c6::50020f23000003d5 and c7::50020f23000003c5 are
"connected" and "configured".
# cfgadm -al
Ap_Id Type Receptacle Occupant Condition
c0 scsi-bus connected configured unknown
c0::dsk/c0t0d0 disk connected configured unknown
c0::dsk/c0t1d0 disk connected configured unknown
c1 scsi-bus connected configured unknown
c1::dsk/c1t6d0 CD-ROM connected configured unknown
c2 fc connected unconfigured unknown
c3 fc connected unconfigured unknown
c4 fc-private connected unconfigured unknown
c5 fc connected unconfigured unknown
c6 fc-fabric connected configured unknown
c6::50020f23000003d5 disk connected configured unknown
c7 fc-fabric connected configured unknown
c7::50020f23000003c5 disk connected configured unknown
c8 fc connected unconfigured unknown