Sun Microsystems STOREDGE A5000, Installation And Service Manual

Page: 73 / 146

Chapter 6 LED Indicators 6-5
6.4 Enclosure
The enclosure LEDs are located on the front of the disk array at the top of the FPM
and on the back of the disk array near the top of the rear fan tray.
FIGURE 6-5
Enclosure LEDs
TABLE 6-4
Enclosure LEDs
Power Fault Ready Indication Corrective Action
Power is on None
System is ready None
System is active None
N/A N/A A FRU has failed Use the FPM (Chapter 5) to determine
which FRU has failed.
No power to system Make sure the system is connected.
Verify that the system power is on.
On Off
Flashing
System power
System fault
System ready