Sun Microsystems StorEdge 6320 System 1.0, Reference And Service Manual

Page: 84 / 176

5-14 Sun StorEdge 6320 System 1.0 Reference and Service Manual • May 2003
5.3.3.1 Creating or Modifying a User Password
Use the following
sscs
arguments to create or modify the password for the user.
To create the password for the Storage Service Processor user accounts, enter the
username and the command prompts you to enter a password. For example:
The valid user names are
admin
,
storage
, and
guest
.
5.3.3.2 Managing Email Notification
When a storage device alarm or event occurs, email is sent by the software to users
designated by the administrator. These commands enable the administrator to
manage this capability.
Modify or create an email notification. This address is the fully-qualified (user name
and domain) address that the
sscs
command uses to send alarms, alerts, or other
events. For example:
Where email-address is a fully-qualified email address.
You can list one or more email contact addresses configured for status alerts by
using the list argument.
5.3.4 Configuring System Settings
The
sscs
commands described in the following subsection enables the
administrator (
admin)
user to configure the Storage Service Processor settings.
# sscs modify password
# sscs modify password
username
password:
# sscs modify notification
email-address