Chapter 3
Default System Configurations and Settings
3-7
3.2.2
Sun StorEdge 6020 Battery Management
Configuration File
The battery management daemon checks and updates the Sun StorEdge 6020 array
battery status on a weekly basis. The
/etc/bat.conf
file specifies the time and day
of the week that the battery daemon is launched. The file resides on the master
enclosure of each group.
This file consists of the following required three data fields:
Valid values for the three fields in the file are as follows:
3.3
Sun StorEdge Network FC Switch
Settings
This section presents a series of tables that provide information about the default
settings for the Sun StorEdge network FC switch-16 switches that come factory
installed in the Sun StorEdge 6320 system. The following information is included in
this subsection:
■
Sun StorEdge network FC switch-16 parameters
■
Sun StorEdge 6320 system switch configuration
DAY 0
HOUR 2
MINUTE 0
DAY
0 = Sunday, 1 = Monday, 2 = Tuesday, 3 = Wednesday, 4 = Thursday, 5 = Friday,
and 6 = Saturday
HOUR
0 to 23 (where 0 = midnight)
MINUTE
0 to 59
Summary of Contents for StorEdge 6320 System 1.0
