Sun Microsystems StorEdge 3000 Series, Installation, Operation And Service Manual

Page: 172 / 318

7-24 Sun StorEdge 3000 Family Installation, Operation, and Service Manual • March 2004
3. To clear the events from the log once you’ve read them, use your arrow keys to
move down to the last event you want to clear and press Return.
A “Clear Above xx Event Logs?” confirmation message is displayed.
4. Choose Yes to clear the recorded event logs.
Note – Resetting the controller clears the recorded event logs. To retain event logs
after controller resets, you can install and use the Sun StorEdge Configuration
Service program.
7.5 Restoring Your Configuration (NVRAM)
From a File
If you have saved a configuration file and want to apply the same configuration to
another array (or reapply it to the array that had the configuration originally), you
must be certain that the channels and IDs in the configuration file are correct for the
array where you are restoring the configuration.
The NVRAM configuration file restores all configuration settings (channel settings,
and host IDs) but does not rebuild logical drives. See
“Saving Configuration
(NVRAM) to a Disk” on page 5-59 for information about how to save a configuration
file, including advice on saving controller-dependent configuration whenever a
configuration change is made.
See “Record of Settings” on page D-1 for advice about keeping a written record of
your configuration before saving or restoring configuration files. See “Save NVRAM
to Disk and Restore From Disk” on page D-7 for a convenient place to keep records
whenever you save or restore configuration files.