manualshive.com logo in svg

Sun Microsystems StorEdge 3000 Series, Installation, Operation And Service Manual

Share
Download
Sun Microsystems StorEdge 3000 Series Installation, Operation And Service Manual Download Page 100

5-22

Sun StorEdge 3000 Family Installation, Operation, and Service Manual • March 2004

5.5.3

Configuring FC Channels as Host or Drive
(Optional)

Sun StorEdge 3510 FC RAID arrays are preconfigured when they arrive from the
factory. Default channel settings and rules are specified as follows:

■

Default channel settings are:

■

CH 0, CH 1, CH 4, and CH 5 = Host channels

■

CH 2 and CH 3 = Drive channels

■

Channels 2 and 3 (CH 2 and 3) must be drive channels.

■

Channels 0, 1, 4, and 5 can be drive or host channels. The most common reason to
change a host channel to a drive channel is to attach an expansion unit to a RAID
array.

To change a host channel to a drive channel, reconfigure the channel according to the
following procedure:

1. Choose “view and edit Scsi channels” from the Main Menu.

Channel information is displayed.

Note –

The Mode column for at least one channel must include the RCC

abbreviation for Redundant Controller Communications.

2. Highlight the channel that you want to modify, and press Return.

Summary of Contents for StorEdge 3000 Series































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands