Sun Microsystems StorageTek TIMBERWOLF 9740, Hardware Operator'S Manual

Page: 35 / 100

95693 Revision P 3-3
Operating the LSM in Automated Mode
4. Close the CAP. The lock automatically engages.
Notes:
• The host software determines what happens when you enter a cartridge
upside down or with an unreadable label. Under normal conditions, the
camera on the hand audits the CAP and recognizes that a cartridge is
present, but the hand does not move it. You must remove the cartridge from
the CAP and correct the problem.
• For some systems, you are prompted to type in a label number when no
VOLSER is read. If you do type in a label number, you might cause a
problem during an audit, because the camera still cannot read an
unreadable VOLSER on the cartridge.
Figure 3-1. Loading a Cartridge into the Cartridge Access Port (C62735)
C62735
CUSTOMER
LABEL
TAPE
CARTRIDGE
VOLUME
SERIAL
NUMBER