Sun Microsystems StorageTek T10000, Operator'S Manual

Page: 88 / 120

Standard/Sport Cartridge Labels
86 T10000 Operator’s Guide • July 2008 Revision EA • 96174
Standard/Sport Cartridge Labels
Standard data cartridge labels consist of eight characters and the associated bar code as
shown in the following figure. These characters may consist of A through Z and the
numbers 0 through 9. No special characters (&$%@# and so on) may be used. The first
six characters in the label shown in the following figure are the customer volume ID
(NGD018). The last two characters (T1) are the media identifier.
The color behind the media identifier is usually white for standard cartridges.
VolSafe/Sport VolSafe Cartridge Labels
These labels are the same as standard cartridge labels with the exception that the
background color of the media ID area is usually yellow.
Diagnostic Cartridge Labels
These labels must start with DG and a space (no third character is used) to be
recognized by the library as diagnostic cartridges.
The label is “DG xxxT1” where “DG (and a space)” are the first three characters, “xxx”
can be 000 to 999 and “T1” indicates the media type.
FIGURE B-1
Standard Eight-character Label
FIGURE B-2
Diagnostic Cartridge Label