Sun Microsystems SPARC Enterprise T1000, Administration Manual, Page: 76 / 82

58 Sun SPARC Enterprise T1000 Server Administration Guide • April 2007
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
Serial management port (baud rate, bits,
parity, stop, handshake). The serial
management port only works at the default
values.
output-device virtual-
console,
screen
virtual-
console
Power-on output device.
input-device virtual-
console,
keyboard
virtual-
console
Power-on input device.
auto-boot-on-error? true, false false
If
true
, boot automatically after system
error.
load-base 0-n 16384
Address.
auto-boot? true, false true
If
true
, boot automatically after power on
or reset.
boot-command
variable-name
boot
Action following a
boot
command.
boot-file
variable-name
none
File from which to boot if
diag-switch?
is
false.
boot-device
variable-name
disk net
Devices from which to boot if
diag-switch?
is
false.
use-nvramrc? true, false false
If
true
, execute commands in NVRAMRC
during server startup.
nvramrc
variable-name
none
Command script to execute if
use-nvramrc?
is
true.
security-mode none, command,
full
none
Firmware security level.
security-password
variable-name
none
Firmware security password if
security-mode
is not
none
(never
displayed). Do not set this directly.
security-#badlogins
variable-name
none
Number of incorrect security password
attempts.
TABLE A-1
OpenBoot Configuration Variables Stored on the System Configuration Card (Continued)
Variable Possible Values Default Value Description