Sun Microsystems SPARC Enterprise T1000, Administration Manual

Page: 71 / 82

Chapter 3 Managing Disk Volumes 53
5. To re-label all of the member disks of the volume using the
format
command,
select the disk name that represents the RAID volume that you have configured.
In this example,
c0t0d0
is the logical name of the volume.
# format
Searching for disks...done
AVAILABLE DISK SELECTIONS:
0. c0t0d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd
16 sec 136>
/pci@7c0/pci@0/pci@8/scsi@2/sd@0,0
1. c0t1d0 <LSILOGIC-LogicalVolume-3000 cyl 65533 alt 2 hd
16 sec 136>
/pci@7c0/pci@0/pci@8/scsi@2/sd@1,0
Specify disk (enter its number): 0
selecting c0t0d0
[disk formatted]
FORMAT MENU:
disk - select a disk
type - select (define) a disk type
partition - select (define) a partition table
current - describe the current disk
format - format and analyze the disk
repair - repair a defective sector
label - write label to the disk
analyze - surface analysis
defect - defect list management
backup - search for backup labels
verify - read and display labels
save - save new disk/partition definitions
inquiry - show vendor, product and revision
volname - set 8-character volume name
!<cmd> - execute <cmd>, then return
quit