Sun Microsystems Netra T4 AC100, Service And System Reference Manual

Page: 79 / 284

Chapter 4 Troubleshooting 4-27
4.5.4.10
i2c@1,30
The following code example shows the i2c1,30 output message.
4.5.4.11
network@5,1
The following code example shows the network@5,1 output message.
4.5.4.12
parallel@1,300278
The following code example shows the parallel port output message.
CODE EXAMPLE 4-18
i2c@1,30
Diagnostic Output Message
obdiag> test 8
Hit the spacebar to interrupt testing
Testing /pci@8,700000/ebus@5/i2c@1,30
................................. passed
Pass:1 (of 1) Errors:0 (of 0) Tests Failed:0 Elapsed Time: 0:0:0:0
Hit any key to return to the main menu
CODE EXAMPLE 4-19 network@5,1
Diagnostic Output Message
obdiag> test 9
Hit the spacebar to interrupt testing
Testing /pci@8,700000/network@5,1
..................................... passed
Hit any key to return to the main menu
CODE EXAMPLE 4-20
parallel@1,300278
Diagnostic Output Message
obdiag> test 10
Hit the spacebar to interrupt testing
Testing /pci@8,700000/ebus@5/parallel@1,300278
........................ passed
Pass:1 (of 1) Errors:0 (of 0) Tests Failed:0 Elapsed Time: 0:0:0:0
Hit any key to return to the main menu