Sun Microsystems Netra T4 AC100, Service And System Reference Manual

Page: 78 / 284

4-26 Netra T4 AC100/DC100 Service and System Reference Manual • August 2001
4.5.4.7
flashprom@0,0
The following code example shows the flashprom output message.
4.5.4.8
gpio@1,300600
The following code example shows the gpio output message.
4.5.4.9
i2c@1,2e
The following code example shows the i2c1,2e output message.
CODE EXAMPLE 4-15
flashprom@0,0
Diagnostic Output Message
obdiag> test 5
Hit the spacebar to interrupt testing
Testing /pci@8,700000/ebus@5/flashprom@0,0
............................ passed
Pass:1 (of 1) Errors:0 (of 0) Tests Failed:0 Elapsed Time: 0:0:0:3
Hit any key to return to the main menu
CODE EXAMPLE 4-16 gpio@1,300600
Diagnostic Output Message
obdiag> test 6
Hit the spacebar to interrupt testing
Testing /pci@8,700000/ebus@5/gpio@1,300600
............................ passed
Pass:1 (of 1) Errors:0 (of 0) Tests Failed:0 Elapsed Time: 0:0:0:0
Hit any key to return to the main menu
CODE EXAMPLE 4-17
i2c@1,2e
Diagnostic Output Message with TIP Line Installed
obdiag> test 7
Hit the spacebar to interrupt testing
Testing /pci@8,700000/ebus@5/i2c@1,2e
................................. passed
Pass:1 (of 1) Errors:0 (of 0) Tests Failed:0 Elapsed Time: 0:0:0:0
Hit any key to return to the main menu