Sun Microsystems Netra t1 100, User And Administration Manual

Page: 84 / 154

62 Netra t1 User and Administration Guide • June 2000
11. Specify whether you want the system to search the network for a Name Server or
whether you want it to use a particular Name Server.
12. If you chose to use a particular Name Server, specify the Host Name and IP
address of the Name Server.
13. Specify whether the Netra t1 system is to be part of a subnet.
14. Specify a Netmask for the system.
15. Confirm the information you have typed in and, when prompted, provide the time
and date information the system needs.
16. When prompted, give a password (if any) for users logging in as root.
17. When asked if you want the sytem to perform Automatic Power Saving
Shutdown, answer No.
Note –
If you answer Yes, the system will automatically put itself into Standby
mode after a period of idleness.
18. When you have provided the information the system needs, it will boot.
What’s Next?
When you have powered on the system and booted and logged in, go to Chapter 8
for information about using different versions of Solaris.
For information about monitoring and managing the Netra t1, see Chapter 9.
For information about Troubleshooting, see Chapter 11.
SysAdmin.book Page 62 Friday, March 30, 2001 2:38 PM