Sun Microsystems Java W1100z, Getting Started Manual

Page: 15 / 42

Chapter 1 Setting Up the Sun Java Workstation W1100z and W2100z 7
4. Connect the Ethernet cable to the Ethernet connector on the Sun Java Workstation
W1100z or W2100z and connect the other end to an Ethernet RJ45 jack.
5. Connect any additional external devices to the workstation’s other connectors.
Powering On the Workstation
Tip – If you are installing optional internal components such as additional memory
DIMMs, PCI cards, optical drives, or hard drives, install those components before
you power on the workstation. If you are not installing optional components, you
are ready to power on the workstation.
1. Turn on power to the monitor and to all external devices.
2. Press and release the workstation Power button on the front panel (
FIGURE 1-2
).
3. After several seconds, verify that the platform power LED on the Power button
lights.
The platform power LED on the Power button lights after the workstation begins the
internal booting process
FIGURE 1-2
.
4. If you are powering on the workstation for the first time, you will need to install
the operating system or configure the preinstalled operating system after the
system is finished booting.
■
See Chapter 2 for information on installing the operating system.
■
See Chapter 3 for information on configuring the preinstalled Java Desktop
System.